ANALOG DEVICES IC SEMICONDUCTOR

Service Details:

FEATURES Enhanced system-level ESD performance per IEC 61000-4-x High data rate: dc to 100 Mbps (NRZ) Compatible with 3.3 V and 5.0 V operation/level translation 105°C maximum operating temperature Low power operation 5 V operation 2.0 mA maximum @ 1 Mbps 5.6 mA maximum @ 25 Mbps 18 mA maximum @ 100 Mbps 3.3 V operation 1.1 mA maximum @ 1 Mbps 4.2 mA maximum @ 25 Mbps 8.3 mA maximum @ 50 Mbps RoHS-compliant, 8-lead SOIC High common- and regulatory approvals UL recognized: 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE Certificate of Conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 VIORM = 560 V peak APPLICATIONS Digital fieldbus isolation Opto-isolator replacement Computer-peripheral interface Microprocessor system interface General instrumentation and data acquisition  GENERAL DESCRIPTION The ADuM31001 is a digital isolator based on the Analog Devices, Inc., iCoupler® technology. Combining high speed CMOS and monolithic transformer technology, this isolation component provides outstanding performance characteristics superior to alternatives, such as optocoupler devices. Configured as a pin-compatible replacement for existing high speed optocouplers, the ADuM3100 supports data rates as high as 25 Mbps and 100 Mbps. The ADuM3100 operates with a voltage supply ranging from 3.0 V to 5.5 V, boasts a propagation delay of <18 ns and an edge asymmetry of <2 ns, and is compatible with temperatures up to 105°C. It operates at very low power, less than 2.0 mA of quiescent current (sum of both sides), and a dynamic current of less than 160 µA per Mbps of data rate. Unlike other optocoupler alternatives, the FUNCTIONAL BLOCK DIAGRAM VDD1 1 8 VI (DATA IN) VDD1 GND1 2 3 E N C O D E UPDATE 4 D E C O D E WATCHDOG ADuM3100 NOTES 7 6 1. FOR PRINCIPLES OF OPERATION, SEE METHOD OF OPERATION,    DC CORRECTNESS, AND MAGNETIC FIELD IMMUNITY SECTION. Figure 1. 5 VDD2 GND2 VO (DATA OUT) GND2 ADuM3100 provides dc correctness with a patented refresh feature that continuously updates the output signal. 05637-001 The ADuM3100 is offered in two grades. The ADuM3100AR and ADuM3100BR can operate up to a maximum temperature of 105°C and support data rates up to 25 Mbps and 100 Mbps, respectively. In comparison to the ADuM1100 digital isolator, the ADuM3100 contains various circuit and layout changes to provide increased capability relative to system-level IEC 61000-4-x testing (ESD/ burst/surge). The precise capability in these tests for either the ADuM1100 or ADuM3100 is strongly determined by the design and layout of the user’s board or module. For more information, see the AN-793 Application Note, ESD/Latch-Up Considerations with iCoupler Isolation Products. ADuM3100ARZ  −40°C to +105°C 25  40 8-Lead SOIC_N  R-8  ADuM3100ARZ-RL7 −40°C to +105°C 25  40 8-Lead SOIC_N, 1,000 Piece Reel R-8  ADuM3100BRZ −40°C to +105°C 100 10 8-Lead SOIC_N  R-8  ADuM3100BRZ-RL7 −40°C to +105°C 100 10 8-Lead SOIC_N, 1,000 Piece Reel R-8  ADN4624BRNZ−40°C to +125°C28-Lead SOIC (Wide, Finer Pitch)Tube, 46RN-28-1 ADN4624BRNZ-RL−40°C to +125°C28-Lead SOIC (Wide, Finer Pitch)Reel, 1000RN-28-1 ADN4624BCPZ−40°C to +125°C32-Lead LFCSP (6 mm x 6 mm)Tray, 490CP-32-32 ADN4624BCPZ-RL−40°C to +125°C32-Lead LFCSP (6 mm x 6 mm)Reel, 2500CP-32-32 1Z = RoHS Compliant Part.Analog Devices Inc. ADM2561E, ADM2563E, ADM2565E, and ADM2567E RS-  ADP1032ACPZ-3-R7485    ADM2561EBRNZ    ADUM6424ABRNZ3ADSP-BF512BBCZ-4   Analog DevicesAD7799BRUADUM3100AR Analog Devices ISO7310CD TI, ISO7710D TIAtmega168PA-MU AtmelSTM1001LWX6F,   STM1001MWX6F NCP803SN463T1G, NCP803SN438T1G, MAX803SQ463, MAX803SQ438;ADAU1978WBCPZ STM8S208CBT6(STM);AD5242BR10;AD7705BR;AD7714YR;AD7793BRU;AD7799BRU;AD8542AR 

 

Service Details:

The AD7533 is a low cost, 10-bit, 4-quadrant multiplying DAC manufactured using an advanced thin-film-on-monolithicCMOS wafer fabrication process. Pin and function equivalent to the AD7520 industry standard, the AD7533 is recommended as a lower cost alternative for old AD7520 sockets or new 10-bit DAC designs. AD7533 application flexibility is demonstrated by its ability to interface to TTL or CMOS, operate on 5 V to 15 V power, and provide proper binary scaling for reference inputs of either positive or negative polarity.

FEATURES Low cost 10-bit DAC Low cost AD7520 replacement Linearity: ½ LSB, 1 LSB, or 2 LSB Low power dissipation Full 4-quadrant multiplying DAC CMOS/TTL direct interface Latch free (protection Schottky not required) Endpoint linearity APPLICATIONS Digitally controlled attenuators Programmable gain amplifiers Function generation Linear automatic gain controls 

Service Details:

Digital Signal Processors & Controllers - DSP, DSC ADSP-BF522 Processor,400MhzBlackfin Embedded Processor ADSP-BF522/ADSP-BF523/ADSP-BF524/ADSP-BF525/ADSP-BF526/ADSP-BF527 FEATURES Up to 600 MHz high performance Blackfin processor Two 16-bit MACs, two 40-bit ALUs, four 8-bit video ALUs, 40-bit shifter RISC-like register and i regulator (ADSP-BF523/ ADSP-BF525/ADSP-BF527 processors only) Qualified for Automotive Applications. See Automotive Products on Page 87 289-ball and 208-ball CSP_BGA packages MEMORY 132K bytes of on-chip memory (See Table 1 on Page 3 for L1 and L3 memory size details) External memory controller with glueless support for SDRAM and asynchronous 8-bit and 16-bit memories Flexible booting options from external flash, SPI, and TWI memory or from host devices including SPI, TWI, and UART Code security with Lockbox Secure Technology one-time-programmable (OTP) memory Memory management unit providing memory protection VOLTAGE REGULATOR* WATCHDOG TIMER JTAG TEST AND EMULATION B L1 INSTRUCTION MEMORY EAB USB 16 INTERRUPT  Debug/JTAG interface On-chip PLL capable of frequency multiplicationADSP-BF522BBCZ-3A–40°C to +85°C300 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF522BBCZ-4A–40°C to +85°C400 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF522KBCZ-30°C to +70°C300 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF522KBCZ-40°C to +70°C400 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF523BBCZ-5A –40°C to +85°C533 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF523KBCZ-5 0°C to +70°C533 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF523KBCZ-6 0°C to +70°C600 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF523KBCZ-6A 0°C to +70°C600 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF524BBCZ-3A–40°C to +85°C300 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF524BBCZ-4A–40°C to +85°C400 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF524KBCZ-30°C to +70°C300 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF524KBCZ-40°C to +70°C400 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF525ABCZ-5–40°C to +70°C500 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF525ABCZ-6–40°C to +70°C600 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF525BBCZ-5A –40°C to +85°C533 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF525KBCZ-5 0°C to +70°C533 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF525KBCZ-6 0°C to +70°C600 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF525KBCZ-6A 0°C to +70°C600 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF526BBCZ-3A–40°C to +85°C300 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF526BBCZ-4A–40°C to +85°C400 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF526KBCZ-30°C to +70°C300 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF526KBCZ-40°C to +70°C400 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF527BBCZ-5A –40°C to +85°C533 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF527KBCZ-5 0°C to +70°C533 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF527KBCZ-6 0°C to +70°C600 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF527KBCZ-6A 0°C to +70°C600 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2

Service Details:

FEATURESIsolated RS-485/RS-422 transceiver, configurable as half orfull duplexisoPower integrated isolated dc-to-dc converter±15 kV ESD protection on RS-485 input/output pinsComplies with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E)ADM2582E data rate: 16 MbpsADM2587E data rate: 500 kbps5 V or 3.3 V operationConnect up to 256 nodes on one busOpen- and short-circuit, fail-safe receiver inputs High common-mode transient immunity: >25 kV/μs Thermal shutdown protectionSafety and regulatory appFEATURESIsolated RS-485/RS-422 transceiver, configurable as half orfull duplexisoPower integrated isolated dc-to-dc converter±15 kV ESD protection on RS-485 input/output pinsComplies with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E)ADM2582E data rate: 16 MbpsADM2587E data rate: 500 kbps5 V or 3.3 V operationConnect up to 256 nodes on one busOpen- and short-circuit, fail-safe receiver inputs High common-mode transient immunity: >25 kV/μs Thermal shutdown protectionSafety and regulatory appIsolated RS-485/RS-422 transceiver, configurable as half orfull duplexisoPower integrated isolated dc-to-dc converter±15 kV ESD protection on RS-485 input/output pinsComplies with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E)ADM2582E data rate: 16 MbpsADM2587E data rate: 500 kbps5 V or 3.3 V operationConnect up to 256 nodes on one busOpen- and short-circuit, fail-safe receiver inputs High common-mode transient immunity: >25 kV/μs Thermal shutdown protectionSafety and regulatory approvalsUL recognition: 2500 V rms for 1 minute per UL 1577VDE Certificates of ConformityDIN EN 60747-5-2 (VDE 0884 Part 2): 2003-01VIORM = 560 V peak Operating temperature range: −40°C to +85°CHighly integrated, 20-lead, wide-body SOIC packageAPPLICATIONSIsolated RS-485/RS-422 interfacesIndustrial field networksMultipoint data transmission systemsFUNCTIONAL BLOCK DIAGRAMADM2582E/ADM2587ETxDABYZDEVCCRxDREISOLATIONBARRIERTRANSCEIVERGND1GND2ENCODEENCODEDECODEDECODEDRDECODEENCODEOSCILLATORRECTIFIERREGULATORVISOOUTDIGIT AL ISOL ATIONiC ouplerisoPower DC-TO-DCCONVERTERVISOIN08111-001Figure 1. GENERAL DESCRIPTIONThe ADM2582E/ADM2587E are fully integrated signal and power isolated data transceivers with ±15 kV ESD protection and are suitable for high speed communication on multipoint transmission lines. The ADM2582E/ADM2587E include an integrated isolated dc-to-dc power supply, which eliminates the need for an external dc-to-dc isolation block. They are designed for balanced transmission lines and comply with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E). The devices integrate Analog Devices, Inc.,iCoupler® technologyto combine a 3-channel isolator, a three-state differential line driver,a differential input receiver, and Analog DevicesisoPower® dc-to-dc converter into a single package. The devices are powered by a single 5 V or 3.3 V supply, realizing a fully integrated signal and power isolated RS-485 solution.The ADM2582E/ADM2587E driver has an active high enable. An active low receiver enable is also provided, which causes the receiver output to enter a high impedance state when disabled.The devices have current limiting and thermal shutdown features to protect against output short circuits and situations where bus contention may cause excessive power dissipation. The parts are fully specified over the industrial temperature range and are available in a highly integrated, 20-lead, wide-bodySOIC package.The ADM2582E/ADM2587E contain isoPower technology thatuses high frequency switching elements to transfer power throughthe transformer. Special care must be taken during printed circuitboard (PCB) layout to meet emissions standards. Refer to the AN-0971 Application Note, Control of Radiated Emissions with isoPower Devices, for details on board layout considerations.

Service Details:

ANALOG DEVICE  Our range of products include ad204kn ic, ad536ajh ic, ad7705bn ic, ad8001anz ic, ad7828bq ic and ad811anz ic.

Additional Information:

• Delivery Time: 2
• Packaging Details: ESD

Service Details:

Service Details:

Ic  microchip. Texas instruments,  nalog devices, st microelectronics , picmocrocontroller

Service Details:

n Wide Input Voltage Range: 3.0V to 42V n Ultralow Quiescent Current Burst Mode® Operation: n <2.5µA IQ Regulating 12VIN to 3.3VOUT n Output Ripple <10mVP-P n High Efficiency 2MHz Synchronous Operation: n >93% Efficiency at 1A, 5VOUT from 12VIN n 3A Maximum Continuous Output n Fast Minimum Switch-On Time: 45ns n LT8609A Available in Fixed 3.3V and 5V Output n Adjustable and Synchronizable: 200kHz to 2.2MHz n Spread Spectrum Frequency Modulation for Low EMI n Allows Use of Small Inductors n Low Dropout n Peak Current Mode Operation n Accurate 1V Enable Pin Threshold n Internal Compensation n Output Soft-Start and Tracking n Small 10-Lead MSOP Package, 16-Lead MSOP Package, or 10-Lead 3mm × 3mm DFN Package with Side Wettable Flanks n AEC-Q100 Qualified for Automotive Applications n GSM Transceivers n General Purpose Step-Down n Low EMI Step-Down All registered trademarks and trademarks are the property of their respective owners

Service Details:

A3979SLPTR-T Integrated Circuits A3979SLPTR-T Integrated CircuitsA3979SLPTR-T Integrated Circuits

Service Details:

GENERAL DESCRIPTION The AD9850 is a highly integrated device that uses advanced DDS technology coupled with an internal high speed, high performance D/A converter and comparator to form a complete, digitally programmable frequency synthesizer and clock generator function. When referenced to an accurate clock source, the AD9850 generates a spectrally pure, frequency/phase programmable, analog output sine wave. This sine wave can be used directly as a frequency source, or it can be converted to a square wave for agile-clock generator applications. The AD9850’s innovative high speed DDS core provides a 32-bit frequency tuning word, which results in an output tuning resolution of 0.0291 Hz for a 125 MHz reference clock input. The AD9850’s circuit architecture allows the generation of output frequencies of up to one-half the reference clock frequency (or 62.5 MHz), and the output frequency can be digitally changed (asynchronously) at a rate of up to 23 million new frequencies per second. The device also provides five bits of digitally controlled phase modulation, which enables phase shifting of its output in increments of 180°, 90°, 45°, 22.5°, 11.25°, and any combination thereof. The AD9850 also contains a high speed comparator that can be configured to accept the (externally) filtered output of the DAC to generate a low jitter square wave output. This facilitates the device’s use as an agile clock generator function. The frequency tuning, control, and phase modulation words are loaded into the AD9850 via a parallel byte or serial loading format. The parallel load format consists of five iterative loads of an 8-bit control word (byte). The first byte controls phase modulation, power-down enable, and loading format; Bytes 2 to 5 comprise the 32-bit frequency tuning word. Serial loading is accomplished via a 40-bit serial data stream on a single pin. The AD9850 Complete DDS uses advanced CMOS technology to provide this breakthrough level of functionality and performance on just 155 mW of power dissipation (3.3 V supply). The AD9850 is available in a space-saving 28-lead SSOP, surface-mount package. It is specified to operate over the extended industrial temp

Service Details:

Digital Isolators DUAL-CHANNEL DIGITAL ISOLATORSDual-Channel Digital Isolators Data Sheet ADuM1200/ADuM1201 Rev. K Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2004–2016 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com FEATURES Narrow body, RoHS-compliant, SOIC 8-lead package Low power operation 5 V operation 1.1 mA per channel maximum at 0 Mbps to 2 Mbps 3.7 mA per channel maximum at 10 Mbps 8.2 mA per channel maximum at 25 Mbps 3 V operation 0.8 mA per channel maximum at 0 Mbps to 2 Mbps 2.2 mA per channel maximum at 10 Mbps 4.8 mA per channel maximum at 25 Mbps Bidirectional communication 3 V/5 V level translation High temperature operation: 125°C High data rate: dc to 25 Mbps (NRZ) Precise timing characteristics 3 ns maximum pulse width distortion 3 ns maximum channel-to-channel matching High common-mode transient immunity: >25 kV/μs Safety and regulatory approvals UL recognition 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE Certificate of Conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 VIORM = 560 V peak Qualified for automotive applications APPLICATIONS Size-critical multichannel isolation SPI interface/data converter isolation RS-232/RS-422/RS-485 transceiver isolation Digital field bus isolation Hybrid electric vehicles, battery monitor, and motor drive GENERAL DESCRIPTION The ADuM1200/ADuM12011 are dual-channel digital isolators based on the Analog Devices, Inc., iCoupler® technology. Combining high speed CMOS and monolithic transformer technologies, these isolation components provide outstanding performance characteristics superior to alternatives, such as optocouplers. By avoiding the use of LEDs and photodiodes, iCoupler devices remove the design difficulties commonly associated with optocouplers. The typical optocoupler concerns regarding uncertain current transfer ratios, nonlinear transfer functions, and temperature and lifetime effects are eliminated with the simple iCoupler digital interfaces and stable performance characteristics. The need for external drivers and other discrete components is eliminated with these iCoupler products. Furthermore, iCoupler devices consume one-tenth to one-sixth the power of optocouplers at comparable signal data rates. The ADuM1200/ADuM1201 isolators provide two independent isolation channels in a variety of channel configurations and data rates (see the Ordering Guide). Both devices operate with the supply voltage on either side ranging from 2.7 V to 5.5 V, providing compatibility with lower voltage systems as well as enabling a voltage translation functionality across the isolation barrier. In addition, the ADuM1200/ADuM1201 provide low pulse width distortion (<3 ns for CR grade) and tight channelto-channel matching (<3 ns for CR grade). Unlike other optocoupler alternatives, the ADuM1200/ADuM1201 isolators have a patented refresh feature that ensures dc correctness in the absence of input logic transitions and during powerup/power-down conditions. The ADuM1200W and ADuM1201W are automotive grade versions qualified for 125°C operation. See the Automotive Products section for more information. FUNCTIONAL BLOCK DIAGRAMS ENCODE DECODE ENCODE DECODE VDD1 VIA VIB GND1 VDD2 VOA VOB GND2 1 2 3 4 8 7 6 5 04642-001 Figure 1. ADuM1200 Functional Block Diagram ENCODE DECODE

Service Details:

FEATURES Superior Upgrade for MAX690–MAX695 Specified Over Temperature Low Power Consumption (5 mW) Precision Voltage Monitor Reset Assertion Down to 1 V VCC Low Switch On-Resistance 1.5 V Normal, 20 V in Backup High Current Drive (100 mA) Watchdog Timer—100 ms, 1.6 s, or Adjustable 600 nA Standby Current Automatic Battery Backup Power Switching Extremely Fast Gating of Chip Enable Signals (5 ns) Voltage Monitor for Power Fail APPLICATIONS Microprocessor Systems Computers Controllers Intelligent Instruments Automotive Systems GENERAL DESCRIPTION The ADM690–ADM695 family of supervisory circuits offers complete single chip solutions for power supply monitoring and battery control functions in microprocessor systems. These functions include µP reset, backup battery switchover, watchdog timer, CMOS RAM write protection, and power failure warning. The complete family provides a variety of configurations to satisfy most microprocessor system requirements. The ADM690, ADM692 and ADM694 are available in 8-pin DIP packages and provide: 1. Power-on reset output during power-up, power-down and brownout conditions. The RESET output remains operational with VCC as low as 1 V. 2. Battery backup switching for CMOS RAM, CMOS microprocessor or other low power logic. 3. A reset pulse if the optional watchdog timer has not been toggled within a specified time. 4. A 1.3 V threshold detector for power fail warning, low battery detection, or to monitor a power supply other than +5 V. The ADM691, ADM693 and ADM695 are available in 16-pin DIP and small outline packages and provide three additional functions. 1. Write protection of CMOS RAM or EEPROM. 2. Adjustable reset and watchdog timeout periods. 3. Separate watchdog timeout, backup battery switchover, a

Service Details:

Cycle-by-Cycle Current Limiting Portable Computers Battery-Powered Systems Battery Charger Distributed Power The LT ® 1375/LT1376 are 500kHz monolithic buck mode switching regulators. A 1.5A switch is included on the die along with all the necessary oscillator, control and logic circuitry. High switching frequency allows a considerable reduction in the size of external components. The topology is current mode for fast transient response and good loop stability. Both fixed output voltage and adjustable parts are available. A special high speed bipolar process and new design techniques achieve high efficiency at high switching frequency. Efficiency is maintained over a wide output current range by using the output to bias the circuitry and by utilizing a supply boost capacitor to saturate the power switch. A shutdown signal will reduce supply current to 20µA on both parts. The LT1375 can be externally synchronized from 580kHz to 900kHz with logic level inputs. The LT1375/LT1376 fit into standard 8-pin PDIP and SO packages, as well as a fused lead 16-pin SO with much lower thermal resistance. Full cycle-by-cycle short-circuit protection and thermal shutdown are provided. Standard surface mount external parts are used, including the inductor and capacitors. For low input voltage applications with 3.3V output, see LT1507.

Service Details:

FEATURES Up to 600 MHz high performance Blackfin processor Two 16-bit MACs, two 40-bit ALUs, four 8-bit video ALUs, 40-bit shifter RISC-like register and instruction model for ease of programming and compiler-friendly support Advanced debug, trace, and performance monitoring Accepts a wide range of supply voltages for internal and I/O operations. See Specifications on Page 28 Programmable on-chip voltage regulator (ADSP-BF523/ ADSP-BF525/ADSP-BF527 processors only) Qualified for Automotive Applications. See Automotive Products on Page 87 289-ball and 208-ball CSP_BGA packages MEMORY 132K bytes of on-chip memory (See Table 1 on Page 3 for L1 and L3 memory size details) External memory controller with glueless support for SDRAM and asynchronous 8-bit and 16-bit memories Flexible booting options from external flash, SPI, and TWI memory or from host devices 
ADSP-BF522BBCZ-3A–40°C to +85°C300 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF522BBCZ-4A–40°C to +85°C400 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF522KBCZ-30°C to +70°C300 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF522KBCZ-40°C to +70°C400 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF523BBCZ-5A –40°C to +85°C533 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF523KBCZ-5 0°C to +70°C533 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF523KBCZ-6 0°C to +70°C600 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF523KBCZ-6A 0°C to +70°C600 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF524BBCZ-3A–40°C to +85°C300 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF524BBCZ-4A–40°C to +85°C400 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF524KBCZ-30°C to +70°C300 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF524KBCZ-40°C to +70°C400 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF525ABCZ-5–40°C to +70°C500 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF525ABCZ-6–40°C to +70°C600 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF525BBCZ-5A –40°C to +85°C533 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF525KBCZ-5 0°C to +70°C533 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF525KBCZ-6 0°C to +70°C600 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF525KBCZ-6A 0°C to +70°C600 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF526BBCZ-3A–40°C to +85°C300 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF526BBCZ-4A–40°C to +85°C400 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF526KBCZ-30°C to +70°C300 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF526KBCZ-40°C to +70°C400 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF527BBCZ-5A –40°C to +85°C533 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2 ADSP-BF527KBCZ-5 0°C to +70°C533 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF527KBCZ-6 0°C to +70°C600 MHz289-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-289-2 ADSP-BF527KBCZ-6A 0°C to +70°C600 MHz208-Ball Chip Scale Package Ball Grid Array (CSP_BGA)BC-208-2y multiplication

Service Details:

http://www.analog.com/ADSP-BF524?src=ADSP-BF524.pdfFEATURES Up to 600 MHz high performance Blackfin processor Two 16-bit MACs, two 40-bit ALUs, four 8-bit video ALUs, 40-bit shifter RISC-like register and instruction model for ease of programming and compiler-friendly support Advanced debug, trace, and performance monitoring Accepts a wide range of supply voltages for internal and I/O operations. See Specifications on Page 28 Programmable on-chip voltage regulator (ADSP-BF523/ ADSP-BF525/ADSP-BF527 processors only) Qualified for Automotive Applications. See Automotive Products on Page 87 289-ball and 208-ball CSP_BGA packages MEMORY 132K bytes of on-chip memory (See Table 1 on Page 3 for L1 and L3 memory size details) External memory controller with glueless support for SDRAM and asynchronous 8-bit and 16-bit memories FlexibleY IEEE 802.3-compliant 10/100 Ethernet MAC Parallel peripheral interface (PPI), supporting ITU-R 656 video data formats Host DMA port (HOSTDP) 2 dual-channel, full-duplex synchronous serial ports (SPORTs), supporting eight stereo I2S channels 12 peripheral DMAs, 2 mastered by the Ethernet MAC 2 memory-to-memory DMAs with external request lines Event handler with 54 interrupt inputs Serial peripheral interface (SPI) compatible port 2 UARTs with IrDA support 2-wire interface (TWI) controller Eight 32-bit timers/counters with PWM support 32-bit up/down counter with rotary support Real-time clock (RTC) and watchdog timer 32-bit core timer 48 general-purpose I/Os (GPIOs), with programmable hysteresis NAND flash controller (NFC) Debug/JTAG interface On-chip PLL capable of frequency multiplication

Service Details:

Precision Amplifiers ULTRALOW BIAS CURRENT AMP

Service Details:

Data Acquisition ADCs/DACs - Specialised Polyphase Multifunction Energy Meter IC

Service Details:

AD7795BRUZ Integrated CircuitsAD7795BRUZ Integrated Circuits
L6202 Integrated Circuits

Service Details:

L6202 Integrated Circuits
L6202 Integrated Circuits
L6202 Integrated Circuits

Service Details:

8-bit Microcontrollers - MCU 16bit dual ADC with Embedded 8 bit MCUFEATURES High Resolution ???-??? ADCs 2 Independent ADCs (16-Bit Resolution) 16-Bit No Missing Codes, Primary ADC 16-Bit rms (16-Bit p-p) Effective Resolution @ 20 Hz Offset Drift 10 nV/???C, Gain Drift 0.5 ppm/???C Memory 62 Kbytes On-Chip Flash/EE Program Memory 4 Kbytes On-Chip Flash/EE Data Memory Flash/EE, 100 Year Retention, 100 Kcycles Endurance 3 Levels of Flash/EE Program Memory Security In-Circuit Serial Download (No External Hardware) High Speed User Download (5 Seconds) 2304 Bytes On-Chip Data RAM 8051 Based Core 8051 Compatible Instruction Set 32 kHz External Crystal On-Chip Programmable PLL (12.58 MHz Max) 3 ??? 16-Bit Timer/Counter 26 Programmable I/O Lines 11 Interrupt Sources, 2 Priority Levels Dual Data Pointer, Extended 11-Bit Stack Pointer On-Chip Peripherals Internal Power on Reset Circuit 12-Bit Voltage Output DAC Dual 16-Bit ???-??? DACs/PWMs On-Chip Temperature Sensor Dual Excitation Current Sources Time Interval Counter (Wake-Up/RTC Timer) UART, SPI®, and I2C® Serial I/O High Speed Baud Rate Generator (Including 115,200) Watchdog Timer (WDT) Power Supply Monitor (PSM) Power Normal: 2.3 mA Max @ 3.6 V (Core CLK = 1.57 MHz) Power-Down: 20 ???A Max with Wake-Up Timer Running Specified for 3 V and 5 V Operation Package and Temperature Range 52-Lead MQFP (14 mm ??? 14 mm), –40???C to +125???C 56-Lead LFCSP (8 mm ??? 8 mm), –40???C to +85???C APPLICATIONS Intelligent Sensors Weigh Scales Portable Instrumentation, Battery-Powered Systems 4–20 mA Transmitters Data Logging Precision System Monitoring

Service Details:

Analog to Digital Converters - ADC 1CHANNEL L/POWER 24-BIT SD GAIN 128 IC

Service Details:

FEATURES Low cost 10-bit DAC Low cost AD7520 replacement Linearity: ½ LSB, 1 LSB, or 2 LSB Low power dissipation Full 4-quadrant multiplying DAC CMOS/TTL direct interface Latch free (protection Schottky not required) Endpoint linearity APPLICATIONS Digitally controlled attenuators Programmable gain amplifiers Function generation Linear automatic gain controls Rev. C Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any  AD7533ACHIPS    DIE   AD7533JN  −40°C to +85°C  16-Lead Plastic Dual In-Line Package [PDIP] N-16  ±0.2  AD7533JNZ1  −40°C to +85°C  16-Lead Plastic Dual In-Line Package [PDIP] N-16  ±0.2  AD7533KN  −40°C to +85°C  16-Lead Plastic Dual In-Line Package [PDIP] N-16  ±0.1  AD7533KNZ1−40°C to +85°C  16-Lead Plastic Dual In-Line Package [PDIP] N-16  ±0.1  AD7533LN  −40°C to +85°C  16-Lead Plastic Dual In-Line Package [PDIP] N-16  ±0.05  AD7533LNZ1  −40°C to +85°C  16-Lead Plastic Dual In-Line Package [PDIP] N-16  ±0.05  AD7533JP  −40°C to +85°C  20-Lead Plastic Leaded Chip Carrier [PLCC] P-20  ±0.2  AD7533JP-REEL  −40°C to +85°C  20-Lead Plastic Leaded Chip Carrier [PLCC] P-20  ±0.2  AD7533JPZ1−40°C to +85°C  20-Lead Plastic Leaded Chip Carrier [PLCC] P-20  ±0.2  AD7533JPZ-REEL1−40°C to +85°C  20-Lead Plastic Leaded Chip Carrier [PLCC] P-20  ±0.2  AD7533KP  −40°C to +85°C  20-Lead Plastic Leaded Chip Carrier [PLCC] P-20  ±0.1  AD7533KP-REEL  −40°C to +85°C  20-Lead Plastic Leaded Chip Carrier [PLCC] P-20  ±0.1  AD7533KPZ1−40°C to +85°C  20-Lead Plastic Leaded Chip Carrier [PLCC] P-20  ±0.1  AD7533KPZ-REEL1−40°C to +85°C  20-Lead Plastic Leaded Chip Carrier [PLCC] P-20  ±0.1  AD7533KR  −40°C to +85°C  16-Lead Standard Small Outline Package [SOIC_W] RW-16  ±0.1  AD7533KR-REEL  −40°C to +85°C  16-Lead Standard Small Outline Package [SOIC_W] RW-16  ±0.1  AD7533KRZ1−40°C to +85°C  16-Lead Standard Small Outline Package [SOIC_W] RW-16  ±0.1  AD7533KRZ-REEL1−40°C to +85°C  16-Lead Standard Small Outline Package [SOIC_W] RW-16  ±0.1  AD7533AQ  −40°C to +85°C  16-Lead Ceramic Dual In-Line Package [CERDIP] Q-16  ±0.2  AD7533BQ  −40°C to +85°C  16-Lead Ceramic Dual In-Line Package [CERDIP] Q-16  ±0.1  AD7533CQ  −40°C to +85°C  16-Lead Ceramic Dual In-Line Package [CERDIP] Q-16  ±0.05  AD7533SQ  −55°C to +125°C  16-Lead Ceramic Dual In-Line Package [CERDIP] Q-16  ±0.2  AD7533UQ  −55°C to +125°C  16-Lead Ceramic Dual In-Line Package [CERDIP] Q-16  ±0.05  AD7533UQ/883B  −55°C to +125°C  16-Lead Ceramic Dual In-Line Package [CERDIP] Q-16  ±0.05  AD7533TE/883B  −55°C to +125°C  20-Terminal Ceramic Leadless 

Service Details:

Analog to Digital Converters - ADC 3 Channel, 24-Bit SD ADC, PGA & REF IC3Channel, Low Noise, Low Power, 16-/24-Bit, ΣData Sheet Δ ADC with On-Chip In-Amp AD7798 FEATURES RMS noise:  27 nV at 4.17 Hz (AD7799) 65 nV at 16.7 Hz (AD7799) 40 nV at 4.17 Hz (AD7798) 85 nV at 16.7 Hz (AD7798) Current: 380 µA typical Power-down: 1 µA maximum Low noise, programmable gain, instrumentation amp Update rate: 4.17 Hz to 470 Hz 3 differential inputs Internal clock oscillator  Simultaneous 50 Hz/60 Hz rejection Reference detect Low-side power switch Programmable digital outputs Burnout currents Power supply: 2.7 V to 5.25 V –40°C to +105°C temperature range Independent interface power supply 16-lead TSSOP package INTERFACE 3-wire serial SPI®, QSPI™, MICROWIRE™, and DSP compatible Schmitt trigger on SCLK AIN1(+) AIN1(–) AIN2(+) AIN2(–) AIN3(+)/P1 AIN3(–)/P2 PSW GENERAL DESCRIPTION / AD7799 FUNCTIONAL BLOCK DIAGRAM GND AVDD AD7798/AD7799 MUX AVDD REFIN(+) REFIN(–) REFERENCE DETECT SERIAL INTERFACE Σ-Δ IN-AMP GND ADC AND GND INTERNAL CLOCK Figure 1. CONTROL LOGIC AD7798: 16-BIT AD7799: 24-BIT DOUT/RDY DIN SCLK CS DVDD The AD7798/AD7799 are low power, low noise, complete analog front ends for high precision measurement applications. The AD7798/AD7799 contains a low noise, 16-/24-bit ∑-??? ADC with three differential analog inputs. The on-chip, low noise instrumentation amplifier means that signals of small amplitude can be interfaced directly to the ADC. With a gain setting of 64, the rms noise is 27 nV for the AD7799 and 40 nV for the AD7798 when the update rate equals 4.17 Hz.  APPLICATIONS Weigh scales Pressure measurement Strain gauge transducers Gas analysis Industrial process control Instrumentation Portable instrumentation Blood analysis Smart transmitters Liquid/gas chromotography 6-digit DVM Rev. B Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. On-chip features include a low-side power switch, reference detect, programmable digital output pins, burnout currents, and an internal clock oscillator. The output data rate from the part is software-programmable and can be varied from 4.17 Hz to 470 Hz.  The part operates with a power supply from 2.7 V to 5.25 V.  The AD7798 consumes a current of 300 µA typical, whereas the AD7799 consumes 380 µA typical. Both devices are housed in a 16-lead TSSOP package. AD7798BRUZ –40°C to +105°C  16-Lead TSSOP  RU-16 AD7798BRUZ-REEL –40°C to +105°C  16-Lead TSSOP  RU-16 EVAL-AD7798EBZ  Evaluation Board  AD7799BRU –40°C to +105°C 16-Lead TSSOP RU-16 AD7799BRU-REEL –40°C to +105°C  16-Lead TSSOP RU-16 AD7799BRUZ –40°C to +105°C  16-Lead TSSOP RU-16 AD7799BRUZ-REEL –40°C to +105°C 16-Lead TSSOP RU-16 AD7799BRU ADSP-BF512BBCZ-4 ADAU1978WBCPZ AD5242BR10 AD7705BR AD7714YR AD7793BRU AD8542AR AD7799BRU

Service Details:

FEATURES High Speed 50 MHz Unity Gain Stable Operation 300 V/ms Slew Rate 120 ns Settling Time Drives Unlimited Capacitive Loads Excellent Video Performance 0.04% Differential Gain @ 4.4 MHz 0.198 Differential Phase @ 4.4 MHz Good DC Performance 2 mV max Input Offset Voltage 15 mV/8C Input Offset Voltage Drift Available in Tape and Reel in Accordance with EIA-481A Standard Low Power Only 10 mA Total Supply Current for Both Amplifiers
5 V to
15 V Supplies PRODUCT DESCRIPTION The AD827 is a dual version of Analog Devices’ industrystandard AD847 op amp. Like the AD847, it provides high speed, low power performance at low cost. The AD827 achieves a 300 V/µs slew rate and 50 MHz unity-gain bandwidth while consuming only 100 mW when operating from ±5 volt power supplies. Performance is specified for operation using ±5 V to ±15 V power supplies. The AD827 offers an open-loop gain of 3,500 V/V into 500 ??? loads. It also features a low input voltage noise of 15 nV/√Hz, and a low input offset voltage of 2 mV maximum. Commonmode rejection ratio is a minimum of 80 dB. Power supply rejection ratio is maintained at better than 20 dB with input frequencies as high as 1 MHz, thus minimizing noise feedthrough from switching power supplies. The AD827 is also ideal for use in demanding video applications, driving coaxial cables with less than 0.04% differential gain and 0.19° differential phase errors for 643 mV p-p into a 75 ??? reverse terminated cable. The AD827 is also useful in multichannel, high speed data conversion systems where its fast (120 ns to 0.1%) settling time is of importance. In such applications, the AD827 serves as an input buffer for 8-bit to 10-bit A/D converters and as an output amplifier for high speed D/A converters.

Service Details:

FEATURES Low cost and easy to use Pretrimmed for J or K type thermocouples Internal cold junction compensation High impedance differential input Standalone 5 mV/°C thermometer Reference pin allows offset adjustment Thermocouple break detection Laser wafer trimmed to 1°C initial accuracy and  0.025°C/°C ambient temperature rejection Low power: <1 mW at VS = 5 V Wide power supply range Single supply: 2.7 V to 36 V Dual supply: ±2.7 V to ±18 V Small, 8-lead MSOP APPLICATIONS J or K type thermocouple temperature measurement Setpoint controller Celsius thermometer Universal cold junction compensator White goods (oven, stovetop) temperature measurements Exhaust gas temperature sensing Catalytic converter temperature sensing GENERAL DESCRIPTION The AD8494/AD8495/AD8496/AD8497 are precision instrumentation amplifiers with thermocouple cold junction compensators on an integrated circuit. They produce a high level (5 mV/°C) output directly from a thermocouple signal by combining an ice point reference with a precalibrated amplifier. They can be used as standalone thermometers or as switched output setpoint controllers using a fixed or remote setpoint control. The AD8494/AD8495/AD8496/AD8497 can be powered from a single-ended supply (less than 3 V) and can measure temperatures below 0°C by offsetting the reference input. To minimize selfheating, an unloaded AD849x typically operates with a total supply current of 180 μA, but it is also capable of delivering in excess of ±5 mA to a load. The AD8494 and AD8496 are precalibrated by laser wafer trimming to match the characteristics of J type (iron-constantan) thermocouples; the AD8495 and AD8497 are laser trimmed to match the characteristics of K type (chromel-alumel) thermocouples. See Table 1 for the optimized ambient temperature range of each part. Rev. D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. FUNCTIONAL BLOCK DIAGRAM REF +IN THERMOESD AND OVP AD8494/AD8495/ AD8496/AD8497 A2 COLD JUNCTION COMPENSATION A3OUT COUPLE–IN 1M??? ESD AND OVP A1 Figure 1.  Table 1. Device Temperature Ranges SENSE Optimized Temperature Range Part No. ThermoCouple Type 08529-001 Ambient Temperature (Reference Junction) Measurement Junction AD8494 J 0°C to 50°C Full J type range AD8495 K 0°C to 50°C Full K type range AD8496 J AD8497 K 25°C to 100°C Full J type range 25°C to 100°C Full K type range The AD8494/AD8495/AD8496/AD8497 allow a wide variety of supply voltages. With a 5 V single supply, the 5 mV/°C output allows the devices to cover nearly 1000 degrees of a thermocouple’s temperature range. The AD8494/AD8495/AD8496/AD8497 work with 3 V supplies, allowing them to interface directly to lower supply ADCs. They can also work with supplies as large as 36 V in industrial systems that require a wide common-mode input range. PRODUCT HIGHLIGHTS 1. 2. 3. 4. 5. 6. Document Feedback Complete, precision laser wafer trimmed thermocouple signal conditioning system in a single IC package. Flexible pinout provides for operation as a setpoint controller or as a standalone Celsius thermometer. Rugged inputs withstand 4 kV ESD and provide overvoltage protection (OVP) 
AD8496ARMZ-R7  AD8496CRMZ  AD8494ARMZ-R7  AD8497ARMZ  AD8494CRMZ  AD8497CRMZ-R7 AD8496ARMZ  AD8495CRMZ  AD8494ARMZ  AD8495ARMZ  AD8495CRMZ-R7  AD8497ARMZ-R7  AD8496CRMZR7  AD8495ARMZ-R7  AD8494CRMZ-R7  AD8497CRMZ  AD8494-EVALZ

Service Details:

FEATURES 14-bit/16-bit multiplying DAC Guaranteed monotonicity Output control on power-up and power-down internal or external control Versatile serial interface DAC clears to 0 V in both unipolar and bipolar output ranges APPLICATIONS Industrial process controls PC analog I/O board

Service Details:

Precision Amplifiers ULTRALOW BIAS CURRENT AMP
Precision Amplifiers ULTRALOW BIAS CURRENT AMP

Service Details:

Operational Amplifiers - Op Amps MICROPOWER RAIL-RAIL INPUT&OUTPUT OP AMPEATURES Rail-to-Rail Input and Output Swing Low Power: 60
A/Amplifier Gain Bandwidth Product: 450 kHz Single-Supply Operation: 3 V to 12 V Low Offset Voltage: 300
V max High Open-Loop Gain: 500 V/mV Unity-Gain Stable No Phase Reversal APPLICATIONS Battery Monitoring Sensor Conditioners Portable Power Supply Control Portable Instrumentation

Service Details:

FEATURES High slew rate: 170 V/μs Wide bandwidth: 28 MHz Fast settling time: <200 ns to 0.01% Low offset voltage: <500 μV Unity-gain stable Low voltage operation: ±5 V to ±15 V Low supply current: <10 mA Drives capacitive loads APPLICATIONS High speed image display drivers High frequency active filters Fast instrumentation amplifiers High speed detectors Integrators Photo diode preamps GENERAL DESCRIPTION The OP467 is a quad, high speed, precision operational amplifier. It offers the performance of a high speed op amp combined with the advantages of a precision op amp in a single package. The OP467 is an ideal choice for applications where, traditionally, more than one op amp was used to achieve this level of speed and precision. The internal compensation of the OP467 ensures stable unitygain operation, and it can drive large capacitive loads without oscillation. With a gain bandwidth product of 28 MHz driving a 30 pF load, output slew rate is 170 V/μs, and settling time to 0.01% in less than 200 ns, the OP467 provides excellent dynamic accuracy in high speed data acquisition systems. The channel-to-channel separation is typically 60 dB at 10 MHz. The dc performance of the OP467 includes less than 0.5 mV of offset, a voltage noise density below 6 nV/√Hz, and a total supply current under 10 mA. The common-mode rejection ratio (CMRR) is typically 85 dB. The power supply rejection ratio (PSRR) is typically 107 dB. PSRR is maintained to better than 40 dB with input frequencies as high as 1 MHz. The low offset and drift plus high speed and low noise make the OP467 usable in applications such as high speed detectors and instrumentation. The OP467 is specified for operation from ±5 V to ±15 V over the extended industrial temperature range (−40°C to +85°C) and is available in a 14-lead PDIP, a 14-lead CERDIP, a 16-lead SOIC, and a 20-terminal LCC. Contact your local sales office for the MIL-STD-883 data sheet 

Service Details:

Power Management Specialised - PMIC RMS/DC CONVERTER IC

Additional Information:

• Packaging Details: ESD

Service Details:

8-bit Microcontrollers - MCU 16bit dual ADC with Embedded 8 bit MCU