Capacitors

Service Details:

Cornell Dubilier - CDEType 940 round, axial leaded film capacitors have polypropylene film and dual metallized electrodes for both self healing properties and high peak current carrying capability (dV/dt). This series features low ESR characteristics, excellent high frequency and high voltage capabilities. Highlights - High dV/dt - High pulse current - Low inductance - Self healing Specifications Capacitance Range 0.01 to 4.7 µF Capacitance Tolerance ±10 % (K) Standard; ±5% (J) Optional Rated Voltage 600 to 3000 Vdc (275 to 500 Vac, 60 Hz) Operating Temperature Range –55 ºC to 105 ºC* *Full rated voltage at 85 ºC - derated linearly to 50% rated at 105 ºC Maximum rms Current Check tables for values Insulation Resistance > 100,000 MΩ x µF Test Voltage between Terminals @ 25 ºC 160% rated DC voltage for 60 s Test Voltage between Terminals & Case @ 25 ºC 3 kVac @ 50/60 Hz for 60 s Life Test 2,000 h @ 85 ºC, 125% rated DC voltage Life Expectancy 60,000 h @ rated Vdc, 70 ºC 30,000 h @ rated Vac, 70 ºC

Service Details:

Aluminium Electrolytic Capacitors - Radial Leaded 220uF 50V

Service Details:

Aluminium Electrolytic Capacitors - Snap In 450VDC 470uF 20% PVC STD 6.3mm TermLong-life grade capacitors Applications Servo drives Frequency converters Solar inverters Uninterruptible power supplies Professional power supplies Medical appliances Not for automotive applications unless otherwise specified Features Outstanding ripple current capability Improved charge/discharge robustness Base cooling available upon request for case sizes with diameters of 30 to 35 mm and lengths of 35 to 55 mm Very long useful life High CV product, very long useful life High reliability Extremely improved performance at high frequencies Outstanding low ESR at operating conditions above 50 °C Optimized internal thermal resistance Capacitors with all insulation versions pass the needle flame test according to IEC 60695-11-5 for all flame exposure times up to 120 s RoHS-compatible Construction Rapid charge/discharge-proof, polar Aluminum case, fully insulated with PET Version with PVC insulation on request Version with PVC insulation and additional PET insulation cap on terminal side available for insulating the capacitor from the PCB Snap-in solder pins to hold component in place on PC-board Minus pole marking on case surface Minus pole not insulated from case Overload protection by safety vent on the case wall Terminals Standard version with 2 terminals, 2 lengths available: 6.3 and 4.5 mm 3 terminals to ensure correct insertion: length 4.5 mm

Service Details:

Aluminium Electrolytic Capacitors - Screw Terminal 5000UF 400VAluminium Electrolytic Capacitors - Screw Terminal 5000UF 400VAluminium Electrolytic Capacitors - Screw Terminal 5000UF 400VAluminium Electrolytic Capacitors - Screw Terminal 5000UF 400V

Service Details:

KXGSeries ???For electronic ballast circuits and other long life applications ???Endurance with ripple current : 8,000 to 10,000 hours at 105??? ???Non solvent resistant type ???RoHS2 Compliant

Service Details:

Chip type with 5.5mm height. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Load life of 2000 hours at 85°C. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for deta

Service Details:

Aluminum Electrolytic Capacitors Power Ultra High Ripple Current Snap-In for Solar Fig. 1 FEATURES • Long useful life: 6000 h at +105 °C • Specified for 500 V, 50 °C operation • High ripple current capability • High reliability • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Solar PV inverters • Industrial motor control • Power supply MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Tolerance code on rated capacitance, code letter in accordance with IEC 60062 (± 20 %) • Rated voltage (in V) • Two digit date code, in accordance with IEC 60062 • Name of manufacturer • Code for factory of origin • “-” sign to identify the negative terminal, visible from the top and side of the capacitor • Code number • Climatic category in acco

Service Details:

Long-life grade capacitors Applications Servo drives Frequency converters Solar inverters Uninterruptible power supplies Professional power supplies Medical appliances Not for automotive applications unless otherwise specified Features Very high ripple current capability Improved charge/discharge robustness Base cooling available upon request for case sizes with diameters of 30 to 35 mm and lengths of 35 to 55 mm Rated voltages up to 550 V DC Very high CV product, compact High reliability Extremely improved performance at high frequencies Very low ESR at operating conditions above 50 °C Optimized internal thermal resistance Capacitors with all insulation versions pass the needle flame test according to IEC 60695-11-5 for all flame exposure times up to 120 s RoHS-compatible Construction Rapid charge/discharge-proof, polar Aluminum case, fully insulated with PET Version with PVC insulation and additional PET insulation cap on terminal side available for insulating the capacitor from the PCB Version with PVC insulation available upon request Snap-in solder pins to hold component in place on PC-board Minus pole marking on case surface Minus pole not insulated from case Overload protection by safety vent on the case wall Terminals Standard version with 2 terminals, 2 lengths available: 6.3 and 4.5 mm 3 terminals to ensure correct insertion: l

Service Details:

1 Features • Newer products available: – LMR33630 36-V, 3-A, 400-kHz synchronous converter – LM76003 60-V, 3.5-A, 2.2-MHz synchronous converter • 3.3-V, 5-V, 12-V, 15-V, and adjustable output versions • Adjustable version output voltage range,1.23 V to 37 V (57 V for HV version) ±4% maximum over line and load conditions • Specified 3-A output current • Wide input voltage range: 40 V Up to 60 V for HV version • Requires only four external components • 52-kHz fixed-frequency internal oscillator • TTL-shutdown capability, low-power standby mode • High efficiency • Uses readily available standard inductors • Create a custom design using the LMR33630 or LM76003 with the WEBENCH® Power Designer 2 Applications • Motor drives • Merchant network and server PSU • Appliances • Test and measurement equipment 3 Description The LM2576 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, 15 V, and an adjustable output version. Requiring a minimum number of external components, these regulators are simple to use and include fault protection and a fixed-frequency oscillator. The LM2576 series offers a high-efficiency replacement for popular three-terminal linear regulators. It substantially reduces the size of the heat sink, and in some cases no heat sink is required. A standard series of inductors optimized for use with the LM2576 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. Other features include a ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring 50-μA (typical) standby current. The output switch includes cycle-by-cycle current limiting, as well as thermal shutdown for full protection under fault conditions. The new product, LMR33630, offers reduced BOM cost, higher efficiency, and an 85% reduction in solution size among many other features. The LM76003 requires very few external components and has a pinout designed for simple, optimum PCB layout for EMI and thermal performance. See the device comparison table to compare specs. Device Information PART NUMBER(1) PACKAGE BODY SIZE (NOM) LM2576 LM2576HV TO-220 (5) 10.16 mm × 8.51 mm DDPAK/TO-263 (5) 10.16 mm × 8.42 mm

Service Details:

Downsized from current standard KMG series ???Solvent resistant type except 160 to 450Vdc (see PRECAUTIONS AND GUIDELINES) ???RoHS2 Compliant ???SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105???(6.3 to 100Vdc) -40 to +105???(160 to 400Vdc) -25 to +105???(450Vdc) Rated Voltage Range 6.3 to 450Vdc Capacitance Tolerance ±20% (M) (at 20???, 120Hz) Leakage Current 6.3 to 100Vdc 160 to 450Vdc I=0.03CV or 4µA, whichever is greater. CV???1,000 I=0.1CV+40 max. CV???1,000 I=0.04CV+100 max. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20??? after 1 minute) Dissipation Factor (tanδ) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V tanδ(Max.) 0.28 0.24 0.20 0.16 0.14 0.12 0.10 0.08 0.20 0.24 0.24 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20???, 120Hz) Low Temperature Characteristics (Max. Impedance Ratio) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63 to 100V 160 to 200V 250V 350V 400V 450V (at 120Hz) Z(-25???)/Z(+20???) ???φ8 5 4 3 2

Service Details:

EKXG251ELL221MMN3SFor electronic ballast circuits and other long life applications  Endurance with ripple current : 8,000 to 10,000 hours at 105  Non solvent resistant type  RoHS2 CompliantFor electronic ballast circuits and other long life applications  Endurance with ripple current : 8,000 to 10,000 hours at 105  Non solvent resistant type  RoHS2 Compliant

Service Details:

Salrocom technology is a widely appreciated Electronics components ,electronic parts both Active and Passive ,service provider of Electronics products.We are,Importer,Dstributor of SEMICONDUTOR IC , and Programmble IC and electronics and electrical

Service Details:

• Antenna Accessories
 
• Antennas
 
• Audio Transformers / Signal Transformers
 
• Capacitors
 
• EMI Filters / EMI Suppression
 
• Encoders
 
• Ferrites
 
• Filters
 
• Frequency Control & Timing Devices
 
• Inductors, Chokes & Coils
 
• Potentiometers, Trimmers & Rheostats
 
• Resistors
 
• Signal Conditioning
 
• Thermistors - NTC
 
• Thermistors - PTC
 
• Varistors

Service Details:

•  Antenna Accessories 
•  Antennas 
•  Audio Transformers / Signal Transformers 
•  Capacitors 
•  EMI Filters / EMI Suppression 
•  Encoders 
•  Ferrites 
•  Filters 
•  Frequency Control & Timing Devices 
•  Inductors, Chokes & Coils 
•  Potentiometers, Trimmers & Rheostats 
•  Resistors 
•  Signal Conditioning 
•  Thermistors - NTC 
•  Thermistors - PTC 
•  Varistors 

Service Details:

C2220C103KBGACAUTO 
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 – 3,000 VDC (Automotive Grade) Overview KEMET’s Automotive Grade High Voltage surface mount MLCCs in C0G dielectric are temperature compensating and are suited for resonant circuit applications or those where Q and stability of capacitance characteristics are required. C0G exhibits no change in capacitance with respect to time and voltage and boasts a negligible change in capacitance with reference to ambient temperature. Capacitance change is limited to ±30ppm/°C from −55°C to +125°C. Their exceptional performance at high frequencies has made C0G high voltage the preferred dielectric choice of design engineers worldwide. Whether under-hood or in-cabin, these capacitors are designed to provide reliable performance in mission and safety critical automotive circuits. Stricter testing protocol and inspection criteria have been established for automotive grade products in recognition of potentially harsh environmental conditions. KEMET automotive grade series capacitors meet the demanding Automotive Electronics Council's AEC-Q200 qualification requirements. Benefits • AEC-Q200 automotive qualified • Operating temperature range of −55°C to +125°C • Capacitance offerings ranging from 1 pF to 0.15 μF • DC voltage ratings of 500 V, 630 V, 1 KV, 1.5 KV, 2 KV, 2.5 KV and 3 KV • EIA 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, 2225, 2824, 3040, 3640 and 4540 case sizes • Extremely low ESR and ESL • High ripple current capability • No capacitance shift with voltage • Negligible capacitance shift with respect to temperature • No piezoelectric noise • Lead (Pb)-Free, RoHS and REACH compliant Applications • High frequency power converters • Wide bandgap (WBG), silicon carbide (SiC) and gallium nitride (GaN) systems • Snubber (high dV/dT) • Resonant circuits (LLC, Wireless Charging, etc) • Timing • Filtering © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Built Into Tomorrow C1080_C0G_HV_AUTO_SMD • 9/15/2020 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)