OPTOCOUPLER

Service Details:

Broadcom / AvagoIsolated Sigma-Delta ModulatorData Acquisition ADCs/DACs - SpecialisedHCPL-7860-300E Broadcom / Avago 

Service Details:

4-Pin DIP Phototransistor Optocouplers FOD814, FOD817 Introduction or Description The FOD814 consists of two gallium arsenide infrared emitting diodes, connected in inverse parallel, driving a silicon phototransistor output in a 4−pin dual in−line package. The FOD817 Series consists of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 4−pin dual in−line package. Features • AC Input Response (FOD814) • Current Transfer Ratio in Selected Groups ♦ FOD814: 20–300% ♦ FOD814A: 50–150% ♦ FOD817: 50–600% ♦ FOD817A: 80–160% ♦ FOD817B: 130–260% ♦ FOD817C: 200–400% ♦ FOD817D: 300–600% • Minimum BVCEO of 70 V Guaranteed • Safety and Regulatory Approvals ♦ UL1577, 5,000 VACRMS for 1 Minute ♦ DIN EN/IEC60747−5−5 • This Device is Pb−Free Typical Applications • FOD814 Series ♦ AC Line Monitor ♦ Unknown Polarity DC Sensor ♦ Telephone Line Interface • FOD817 Series ♦ Power Supply Regulators ♦ Digital Logic Inputs ♦ Microprocessor Inputs

Additional Information:

• Packaging Details: TUBE

Service Details:

Description Avago’s 2.5 Amp Gate Drive Optocoupler with Integrated Desaturation (VCE) Detection and Fault Status Feedback makes IGBT VCE  fault protection compact, affordable, and easy-to-implement while satisfying worldwide safety and regulatory requirements. Features (continued) • “Soft” IGBT turn-off • Integrated fail-safe IGBT protection – Desat (VCE) detection – Under Voltage Lock-Out protection (UVLO) with   hysteresis Features • User configurable: inverting, noninverting, auto-reset, auto-shutdown • 2.5 A maximum peak output current • Drive IGBTs up to IC = 150 A, VCE = 1200 V • Optically isolated, FAULT status feedback • SO-16 package • CMOS/TTL compatible • 500 ns max. switching speeds Fault Protected IGBT Gate Drive • Wide operating VCC range: 15 to 30 Volts • -40°C to +100°C operating temperature range • 15 kV/µs min. Common Mode Rejection (CMR) at VCM = 1500 V • Regulatory approvals: UL, CSA, IEC/EN/DIN EN 607475-5 (1414 Vpeak Working Voltage)

Service Details:

HCPL0600, HCPL0601, HCPL0611, HCPL0637, HCPL0638, HCPL0639 High Speed-10 MBit/s Logic Gate Optocouplers Single Channel: HCPL0600, HCPL0601, HCPL0611 Dual Channel: HCPL0637, HCPL0638, HCPL0639 Description The HCPL06XX optocouplers consist of an AlGaAS LED, optically coupled to a very high speed integrated photo−detector logic gate with a strobable output (single channel devices). The devices are housed in a compact small−outline package. This output features an open collector, thereby permitting wired OR outputs. The HCPL0600, HCPL0601 and HCPL0611 output consists of bipolar transistors on a bipolar process while the HCPL0637, HCPL0638, and HCPL0639 output consists of bipolar transistors on a CMOS process for reduced power consumption. The coupled parameters are guaranteed over the temperature range of −40°C to +85°C. An internal noise shield provides superior common mode rejection. Features • Compact SO8 Package • Very High Speed−10 MBit/s • Superior CMR • Logic Gate Output • Strobable Output (Single Channel Devices) • Wired OR−open Collector Safety and Regulatory Approvals • UL1577, 3750 VACRMS for 1 min • DIN EN/IEC60747−5−5, 565 V Peak Working Insu

Service Details:

Available in either 8-pin DIP or SO.8 package style respectively, the Broadcom® HCPL-7723 or HCPL-0723 optocoupler utilize the latest CMOS IC technology to achieve outstanding speed performance of minimum 50 MBd data rate and 2-ns maximum pulse width distortion. Basic building blocks of HCPL-7723/0723 are a CMOS LED driver IC, a high speed LED and a CMOS detector IC. A CMOS logic input signal controls the LED driver IC, which supplies current to the LED. The detector IC incorporates an integrated photodiode, a high-speed transimpedance amplifier, and a voltage comparator with an output driver. CAUTION! It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation, which may be induced by ESD. The components featured in this data sheet are not to be used in military or aerospace applications or environments. Features  +5V CMOS compatibility   High speed: 50 MBd min.  2-ns max. pulse width distortion  22-ns max. propagation delay  16 ns max. propagation delay skew  10 kV/µs min. common mode rejection  –40 to 85°C temperature range  Safety and regulatory approvals: – UL recognized:  5000 Vrms for 1 min. per UL1577 for HCPL-7723 for option 020  3750 Vrms for 1 min. per UL1577 for HCPL-0723 – CSA component acceptance notice #5 – IEC/EN/DIN EN 60747-5-5  Viorm = 630 Vpeak for HCPL-7723 option 060  Viorm = 567 Vpeak for HCPL-0723 option 060 Applications  Digital fieldbus isolation: CC-Link, DeviceNet, Profibus, SDS, Isolated A/D or D/A conversion  Multiplexed data transmission  High-speed digital input/output  Computer peripheral interface  Microprocessor system interface

Service Details:

Available in either an 8-pin DIP or SO-8 package style respectively, the HCPL-7710 or HCPL-0710 optocouplers utilize the latest CMOS IC technology to achieve outstanding performance with very low power consumption. The HCPL-x710 require only two bypass capacitors for complete CMOS compatibility. Basic building blocks of the HCPL-x710 are a CMOS LED driver IC, a high speed LED and a CMOS detector IC. A CMOS logic input signal controls the LED driver IC, which supplies current to the LED. The detector IC incorporates an integrated photodiode, a high-speed transimpedance amplifier, and a voltage comparator with an output driver. Functional Diagram CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. * Pin 3 is the anode of the internal LED and must be left unconnected for guaranteed data sheet performance. Pin 7 is not connected internally. ** A 0.1 µF bypass capacitor must be connected between pins 1 and 4, and 5 and 8. HCPL-7710/0710 40 ns Propagation Delay, CMOS Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product 8 7 6 1 3 SHIELD 5 2 4 **VDD1 VI NC* GND1 VDD2** VO GND2 VI, INPUT LED1 H L OFF ON TRUTH TABLE (POSITIVE LOGIC) NC* IO LED1 VO, OUTPUT H L 8 7 6 5 VDD2** VO GND2 VI, INPUT LED1 H L OFF ON TRUTH TABLE (POSITIVE LOGIC) NC* IO VO, OUTPUT H L Features • +5 V CMOS compatibility • 8 ns maximum pulse width distortion • 20 ns maximum prop. delay skew • High speed: 12 Mbd • 40 ns maximum prop. delay • 10 kV/µs minimum common mode rejection • -40°C to 100°C temperature range • Safety and regulatory approvals UL Recognized 3750 Vrms for 1 min. per UL 1577 5000 Vrms for 1 min. per UL 1577 (for HCPL-7710 option 020) CSA Component Acceptance Notice #5 IEC/EN/DIN EN 60747-5-5 – VIORM = 630 Vpeak for HCPL-7710 Option 060 – VIORM = 567 Vpeak for HCPL-0710 Option 060 Applications • Digital fieldbus isolation: DeviceNet, SDS, Profibus • AC plasma display panel level shifting • Multiplexed data transmission • Computer peripheral interface • Microprocessor system interface

Service Details:

Description The ACPL-217 is a DC-input single-channel half-pitch phototransistor optocoupler that contains a light-emitting diode optically coupled to a phototransistor. It is packaged in a 4-pin SO package. The input-output isolation voltage is rated at 3750VRMS. Response time, tr, is 2 μs typically, while minimum CTR is 50% at input current of 5 mA. ACPL-217 Pin Layout 43 43 12 12 Pin Description 1Ano de 2Cat ho 3 de Emitter 4 Collector Features  Current transfer ratio (CTR: 50% (min) at IF = 5 mA, VCC = 5V)  High input-output isolation voltage (VISO = 3750VRMS)  Non-saturated Response time (tr: 2 μs (typ) at VCC = 10V, IC = 2 mA, RL= 100Ω)  SO package  CMR 10 kV/μs (typical)  Safety and regulatory approvals — cUL — IEC/EN/DIN EN 60747-5-2  Options available: — CTR Ranks 0, A, B, C, and D Applications  I/O Interface for programmable controllers, computers.  Sequence controllers.  System appliances, measuring instruments.  Signal transmission between circuits of different potentials and impedances.ACPL-217-56AE  ACPL-217-50CE  ACPL-217-50AE  ACPL-217-50BE  ACPL-217-56DE  ACPL-217-500E  ACPL-217560E  ACPL-217-56BE  ACPL-217-50DE

Service Details:

Transistor Output Optocouplers Phototx Coupler Quad

Service Details:

The A7600C-C1SE is Multi-Band LTE-TDD/LTE-FDD/GSM /GPRS/EDGE module solution in a SMT type which supports LTE CAT1 up to 10Mbps data transfer. It has strong extension capability with rich interfaces including UART,I2C,USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application. The package of A7600C-C1SE is LCC+LGA. The LCC part is compatible with the package of SIM7600 series. This also maximizes the investments of customers, and enables a short time-to-market. It is designed for applications that need high throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for many applications.