Semiconductor Integrated Circuit

Service Details:

Bat20jfilm   ST               

                      

Service Details:

Wholesale Trader of a wide range of products which include analog devices ad526jnz semiconductor, analog devices ad539jnz semiconductor, analog devices ad561jnz semiconductor rectifier, ad557jnz semiconductor rectifier, bat20jfilm rectifiers and ad7755ar obsolete semiconductor devices.

Additional Information:

• Item Code: 012
• Production Capacity: 100
• Delivery Time: 2-3 DAYS
• Packaging Details: ESD

Service Details:

EEPROM 512k 64Kx8 2.5V SER EE IND• 20 MHz max. Clock Speed • Byte and Page-level Write Operations: - 128-byte page - 5 ms max. - No page or sector erase required • Low-Power CMOS Technology: - Max. Write Current: 5 mA at 5.5V, 20 MHz - Read Current: 10 mA at 5.5V, 20 MHz - Standby Current: 1 A at 2.5V (Deep powerdown) • Electronic Signature for Device ID • Self-Timed Erase and Write cycles: - Page Erase (5 ms, typical) - Sector Erase (10 ms/sector, typical) - Bulk Erase (10 ms, typical) • Sector Write Protection (16K byte/sector): - Protect none, 1/4, 1/2 or all of array • Built-In Write Protection: - Power-on/off data protection circuitry - Write enable latch - Write-protect pin • High Reliability: - Endurance: 1 Million erase/write cycles - Data Retention: >200 year

Service Details:

Salrocom technology is a widely appreciated Electronics components ,electronic parts both Active and Passive ,service provider of Electronics products.We are,Importer,Dstributor of SEMICONDUTOR IC , and Programmble IC and electronics and electrical. 

Additional Information:

• Item Code: HHJCJGCJG
• Production Capacity: 500
• Delivery Time: 2
• Packaging Details: TRAY

Service Details:

1-A Dual-HBD (Dual-Half-Bridge Driver) TLE4207G Data Sheet 1 Rev. 1.3, 2018-07-02 Features • Delivers up to 0.8 A continuous • Optimized for DC motor management applications • Very low current consumption in stand-by (Inhibit) mode • Low saturation voltage; typ.1.2 V total @ 25 °C; 0.4 A • Output protected against short circuit • Error flag diagnosis • Overvoltage lockout and diagnosis • Undervoltage lockout • CMOS/TTL compatible inputs with hysteresis • No crossover current • Internal clamp diodes • Overtemperature protection with hysteresis and diagnosis • Enhanced power PG-DSO-Package • Green Product (RoHS compliant) • AEC Qualified Description The TLE4207G is a protected Dual-Half-Bridge-Driver designed specially for automotive and industrial motion control applications. The part is built using the Infineon bipolar high voltage power technology DOPL. The actuator (DC motor) can be connected direct between the halfbridges. Operation modes forward (cw), reverse (ccw), brake and high impedance are invoked from a standard interface. The standard enhanced power PG-DSO-14 package meets the application requirements and saves PCB-board space and costs. Furthermore the built in features like diagnosis, over- and undervoltage-lockout, shortcircuit-protection, over-temperature-protection and the very low quiescent current in stand-by mode will open a wide range of automotive and industrial applications. Type Ordering Code Package TLE4207G on request PG-DSO-14

Service Details:

FEATURES 16-channel, dual, simultaneously sampled inputs Independently selectable channel input ranges True bipolar: ±10 V, ±5 V, ±2.5 V Single 5 V analog supply and 2.3 V to 3.6 V VDRIVE supply Fully integrated data acquisition solution Analog input clamp protection Input buffer with 1 MΩ analog input impedance First-order antialiasing analog filter On-chip accurate reference and reference buffer Dual 16-bit successive approximation register (SAR) ADC Throughput rate: 2 × 1 MSPS Oversampling capability with digital filter Flexible sequencer with burst mode Flexible parallel/serial interface SPI/QSPI/MICROWIRE/DSP compatible Optional cyclic redundancy check (CRC) error checking Hardware/software configuration Performance 92 dB SNR at 500 kSPS (2× oversampling) 90.5 dB SNR at 1 MSPS −103 dB THD ±1 LSB INL (typical), ±0.99 LSB DNL (maximum) 8 kV ESD rating on analog input channels On-chip self detect function 80-lead LQFP package APPLICATIONS Power line monitoring Protective relays Multiphase motor control Instrumentation and control systems Data acquisition systems (DASs) GENERAL DESCRIPTION The AD7616 is a 16-bit, DAS that supports dual simultaneous sampling of 16 channels. The AD7616 operates from a single 5 V supply and can accommodate ±10 V, ±5 V, and ±2.5 V true bipolar input signals while sampling at throughput rates up to 1 MSPS per channel pair with 90.5 dB SNR. Higher SNR performance can be achieved with the on-chip oversampling mode (92 dB for an oversampling ratio (OSR) of 2). The input clamp protection circuitry can tolerate voltages up to ±21 V. The AD7616 has 1 M??? analog input impedance, regardless of sampling frequency. The single-supply operation, on-chip filtering, and high input impedance eliminate the need for driver op amps and external bipolar supplies. The device contains analog input clamp protection, a dual, 16-bit charge redistribution SAR analog-to-digital converter (ADC), a flexible digital filter, a 2.5 V reference and reference buffer, and high speed serial and parallel interfaces. The AD7616 is serial peripheral

Service Details:

we ate having following stock list
HCPL-316J-500E; TMS320F2812PGFA; TMS320F2808PZA; BCM5241A1KMLG; CL21B225KAFNNNE; CC1101RGPR; MT48LC32M16A2P-75:C TR; MTFC8GLWDQ-3M AIT Z; MT46H64M16LFBF-5 IT:B TR; MT48LC16M16A2P-6A:G TR; MT47H64M16NF-25E:M TR; MSP430F148IPMR; MAX295EWE+T; LMC6482AIMX/NOPB; LM2674MX-5.0/NOPB; TMS320F28335PGFA; MT41K128M16JT-125:K TR; AD623ARZ; MCIMX535DVV1C; TPS62110RSAR; MT48LC16M16A2P-7E:G TR; MCF5272VM66; MT46H32M16LFBF-6 IT:C TR; EPM3032ATC44-10N; MC908AB32CFUE; TMS320VC33PGE120; MC705C8ACPE; AD8221ARMZ-R7; LM2676SX-5.0/NOPB; LM2675MX-ADJ/NOPB; HCPL-0600-500E; LSF2-C3M-TC-N3-HD; ACS712ELCTR-05B-T; TMS320LF2407APGEA; ISO1050DUBR; LM2596SX-3.3/NOPB; MT47H128M16RT-25E:C TR; MT29F4G08ABADAWP-IT:D; MSP430F149IPMR; EN5311QI; AD629ARZ-R7; SN65HVD1781DR; HFBR-2412Z; MC908AZ60ACFUE; EP2C20F484C8N; EP3C16F256C8N; AD822ARZ; LM317AEMP/NOPB; AD7708BRUZ-REEL7; EPM240T100I5N; AD420ARZ-32; AD620ARZ-REEL7; IS42S32800D-7BLI; EE-SX1103; LTC3824EMSE#TRPBF; HCNW2611-500E; MT48LC16M16A2P-6A IT:G TR; ADV7626KBCZ-8-RL; LM2675MX-5.0/NOPB; MT41J64M16JT-15E:G TR; AD7722ASZ; LM2596SX-5.0/NOPB; DS28EC20+T; HFBR-1414Z; MT47H64M16NF-25E AIT:M TR; AD822ARZ-REEL7; LM5007MM/NOPB; HCPL-0731-500E; W25Q32FVSSIG T; ASMT-YTB2-0BB02; HCNR201-500E; MPC5200CVR400B; 53398-0271; CC2541F256RHAR; TMS320F2801PZA; DS90C385AMTX/NOPB; LM2675M-5.0/NOPB; MT48LC8M16A2P-6A:L TR; NET2272REV1A-LF; AD7714YRUZ; OP295GSZ; TM4C1230D5PMIR; LM2594HVMX-5.0/NOPB; HCPL-0701-500E; HFBR-1521Z; MAX3421EETJ+T; MT48LC16M16A2B4-6A IT:G TR; LM3401MM/NOPB; MT41K256M16HA-125:E TR; LM2594MX-5.0/NOPB; CL05A225KP5NSNC; XC3S50AN-4TQG144C; WL1831MODGBMOCR; AD8362ARUZ-REEL7; EN5335QI; EN63A0QI; HCPL-0710-500E; LM7301IM5/NOPB; LMC6482IMX/NOPB; EN5322QI; C8051F360-C-GQR; HFBR-2521Z; HFBR-1414TZ; DNOQ44QAH109A; LM3485MM/NOPB; EN5337QI; MT46H64M16LFBF-6 IT:B TR; MSP430F135IPMR; OPA340NA/3K; EP1C6Q240C8N; TPS54060DGQR; SPX1117M3-L/TR; SN65HVD234DRG4; JHA1-800-874; OP482GSZ-REEL7; AFBR-5803Z; MC68332ACEH16; T491D226K035AT; AD736JRZ; LM317EMP/NOPB; LM2937IMP-5.0/NOPB; LT1933ES6#TRPBF; RT8462GS; NT5TU32M16EG-AC; W25Q16DVSSIG TR; LM2671MX-5.0/NOPB; AD633JRZ; SN65HVD251DR; OPA4277UA/2K5; SN74HC14N; 74441-0001; ADS1254E/2K5; MSP430F437IPNR; LT1054CS8#TRPBF; TMS320VC5509AZHH; MT47H32M16HR-25E:G TR; HCPL-316J-000E; AD8512ARZ-REEL7; LMC6484AIMX/NOPB; MT47H128M8CF-3:H TR; CS8900A-CQ3Z; K4B4G1646D-BCK0000; TPS74801DRCR; EPM3064ATC100-10N; TLC555CDR; LM2734YMK/NOPB; TMS320LF2406APZA; LM25101BMAX/NOPB; SN75LVDS84ADGGR; EPM240T100C5N; MAX525BCAP+T; LM60CIM3/NOPB; MT47H64M16HR-25E:H TR; HCNR201-550E; MCF5208CVM166; DP83848CVV/NOPB; FL-80C; CL31A107MQHNNNE; G8A01121C; LTC485CS8#TRPBF; OP295GSZ-REEL; LM4040AIM3-2.5/NOPB; IS62WV51216BLL-55TLI; LM2734XMK/NOPB; REF02CSZ-REEL7; SN65HVD230DR; AT45DB321D-MU; LM5008MM/NOPB; LMV934MAX/NOPB; BCM5221A4KPTG; S216S02F; HCPL-181-00BE; HFBR-1528Z; AD8605ARTZ-REEL7; MAX668EUB+T; CC2530F128RHAR; AD780ARZ; HCPL-0601-500E; MC68HC705C8ACFNE; AM3356BZCZD60; LM5118MHX/NOPB; LT3470ETS8#TRMPBF; LMD18200T/NOPB; EPCS4SI8N; TPS22924BYZPRB; XPGWHT-01-0000-00FE5; TPS54620RGYR; ADS8364Y/2K; MCHC912B32CFUE8; MT48LC8M16A2B4-6A:L; LM2674M-5.0/NOPB; AD7663ASTZ; TPS40140RHHR; WJLXT971ALC.A4; AD8132ARZ-R7; TPS61030RSAR; MSP430F147IPMR; DRV8837DSGR; EP2C5Q208C8N; DS18B20+; LP2985AIM5-3.3/NOPB; JS28F128J3F75A; AD623ARZ-RL; MT29F2G08ABAEAH4:E TR; MT47H64M16NF-25E IT:M TR; ADUM1301ARWZ-RL; AD7799BRUZ-REEL; HFBR-2528Z; XC9572XL-10TQG100C; HIP4081AIBZT; EPM3128ATC100-10N; P4040NSN1PNB; OP400GSZ; AFBR-5803TZ; ADS1256IDBR; INA138NA/3K; ACPL-217-56BE; HCPL-060L-500E; HSMG-C170; LM2676SX-ADJ/NOPB; EN5336QI; SI4031-B1-FMR; HSMF-A341-A00J1; 53261-0271; CL10A106MQ8NNNC; HCPL-0631-500E; HCPL-061A-500E; HCNR200-550E; CSD97370Q5M; DP83865DVH/NOPB; TPS54610PWPR; EP2C5T144C8N; MSP430F1612IPMR; ADP1621ARMZ-R7; HCPL-063L-000E; DS92LV010ATMX/NOPB; LT1940EFE#TRPBF; MAX7219CNG+; TMS320VC5409APGE16; MPXM2010GS; HFBR-2412TZ; HCNW2611-000E; HCPL-063L-500E; MAX1579ETG+T; LM2576SX-ADJ/NOPB; 

Service Details:

AD7755AAN is a single-phase energy metering IC made by Analog Devices.
It is designed to measure electrical power consumption in electricity meters.

Salrocom technology is a widely appreciated Electronics components ,electronic parts both Active and Passive ,service provider of Electronics products.We are,Importer,Dstributor of SEMICONDUTOR IC , and Programmble IC and electronics and electrical. 

Service Details:

CL7667 Dual Power MOSFET Driver DATASHEET The ICL7667 is a dual monolithic high-speed driver designed to convert TTL level signals into high current outputs at voltages up to 15V. Its high speed and current output enable it to drive large capacitive loads with high slew rates and low propagation delays. With an output voltage swing only millivolts less than the supply voltage and a maximum supply voltage of 15V, the ICL7667 is well suited for driving power MOSFETs in high frequency switched-mode power converters. The ICL7667’s high current outputs minimize power losses in the power MOSFETs by rapidly charging and discharging the gate capacitance. The ICL7667’s inputs are TTL compatible and can be directly driven by common pulse-width modulation control ICs. Features • Fast Rise and Fall Times - 30ns with 1000pF Load • Wide 15V Supply Voltage Range - V+ = +4.5V to +15V - V- = -15V to Ground (0V) • Low Power Consumption - 4mW with Inputs Low - 20mW with Inputs High • TTL/CMOS Input Compatible Power Driver - ROUT = 7??? Typ • Direct Interface with Common PWM Control ICs • Pin Equivalent to DS0026/DS0056; TSC426 • Pb-Free Available (RoHS Compliant) Applications • Switching Power Supplies • DC/DC Converters • Motor Controllers Pinout ICL7667 (8 LD PDIP, SOIC) TOP VIEW Functional Diagram (Each Driver) Ordering Information PART NUMBER (Note) PART MARKING TEMP. RANGE (°C) PACKAGE PKG. DWG. # ICL7667CBA* (No longer available, recommended replacement: ICL7667CBAZA) 7667 CBA 0 to 70 8 Ld SOIC (N) M8.15 ICL7667CBAZA 7667 CBAZ 0 to 70 8 Ld SOIC (N) (Pb-Free) M8.15 ICL7667CPA* 7667 CPA 0 to 70 8 Ld PDIP E8.3 ICL7667CPAZ 7667 CPAZ 0 to 70 8 Ld PDIP** (Pb-Free) E8.3 *Add “-T” suffix for tape and reel. Please refer to TB347 for details on reel specifications. **Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications. NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. N/C OUT A V+ OUT B N/C IN A VIN B 1 2 3 4 8 7 6 5 V+ IN ???

Service Details:

MSP430F135 is a 16-bit ultra-low-power microcontroller (MCU) from Texas Instruments, part of the popular MSP430 family.

We are offering MSP430F135IPMR IC to our clients and also the following items: 

MSC1210Y
MSP430F135 
MSP430F149 
MSP430F413 
MSP430F447 
MSP430F449 
MSP430F4250 
MSP430F4616 

Service Details:

Buffers & Line Drivers Quad Diff Line DrvGeneral Description The MM88C30 is a dual differential line driver that also performs the dual four-input NAND or dual four-input AND function. The absence of a clamp diode to VCC in the input protection circuitry of the MM88C30 allows a CMOS user to interface systems operating at different voltage levels. Thus, a CMOS digital signal source can operate at a VCC voltage greater than the VCC voltage of the MM88C30 line driver. The differential output of the MM88C30 eliminates ground-loop errors. The MM88C29 is a non-inverting single-wire transmission line driver. Since the output ON resistance is a low 20 typ., the device can be used to drive lamps, relays, solenoids, and clock lines, besides driving data lines. Features  Wide supply voltage range: 3V to 15V  High noise immunity: 0.45 VCC (typ.)   Low output ON resistance: 20 (typ.)

Service Details:

The LT®4363 surge stopper protects loads from high voltage transients. It regulates the output during an overvoltage event, such as load dump in vehicles, by controlling the gate of an external N-channel MOSFET. The output is limited to a safe value allowing the loads to continue functioning. The LT4363 also monitors the voltage drop between the SNS and OUT pins to protect against overcurrent faults. An internal amplifier limits the voltage across the current  threshold, the MOSFET is not allowed to turn back on. Back-to-back MOSFETs can be used in lieu of a Schottky diode for reverse input protection, reducing voltage drop and power loss. A shutdown pin reduces the quiescent current to less than 7µA during shutdown. Typical applicaTion 4A, 12V Overvoltage Output Regulator with 150V Surge Protection FDB33N25 VIN 12V 10mΩ 1k 0.1µF 10Ω 127k VCC GATE SNS OUT FB SMAJ58A SHDN 57.6k 4.99k 22µF V
FeaTures nWithstands Surges Over 100V with VCC Clamp nWide Operating Voltage Range: 4V to 80V nAdjustable Output Clamp Voltage nFast Overcurrent Limit: Less Than 5µs nReverse Input Protection to –60V nAdjustable UV/OV Comparator Thresholds nLow 7µA Shutdown Current nShutdown Pin Withstands –60V to 100V nAdjustable Fault Timer nControls N-Channel MOSFET nLess Than 1% Retry Duty Cycle During Faults, LT4363-2 nAvailable in 12-Pin (4mm × 3mm) DFN, 12-Pin MSOP and 16-Pin SO Packages applicaTions nAutomotive/Avionic/Industrial Surge Protection nHot Swap™/Live Insertion nHigh Side Switch for Battery Powered Systems nIntrinsic Safety

LT4363CDE-1#PBFLT4363CDE-1#TRPBF4363112-Lead (4mm × 3mm) Plastic DFN0°C to 70°C LT4363IDE-1#PBFLT4363IDE-1#TRPBF4363112-Lead (4mm × 3mm) Plastic DFN–40°C to 85°C LT4363HDE-1#PBFLT4363HDE-1#TRPBF4363112-Lead (4mm × 3mm) Plastic DFN–40°C to 125°C LT4363CDE-2#PBFLT4363CDE-2#TRPBF4363212-Lead (4mm × 3mm) Plastic DFN0°C to 70°C LT4363IDE-2#PBFLT4363IDE-2#TRPBF4363212-Lead (4mm × 3mm) Plastic DFN–40°C to 85°C LT4363HDE-2#PBFLT4363HDE-2#TRPBF4363212-Lead (4mm × 3mm) Plastic DFN–40°C to 125°C LT4363CMS-1#PBFLT4363CMS-1#TRPBF4363112-Lead Plastic MSOP0°C to 70°C LT4363HMS-1#PBFLT4363HMS-1#TRPBF4363112-Lead Plastic MSOP–40°C to 125°C LT4363IMS-1#PBFLT4363IMS-1#TRPBF4363112-Lead Plastic MSOP–40°C to 85°C LT4363MPMS-1#PBFLT4363MPMS-1#TRPBF4363112-Lead Plastic MSOP–55°C to 125°C LT4363CMS-2#PBFLT4363CMS-2#TRPBF4363212-Lead Plastic MSOP0°C to 70°C LT4363HMS-2#PBFLT4363HMS-2#TRPBF4363212-Lead Plastic MSOP–40°C to 125°C LT4363IMS-2#PBFLT4363IMS-2#TRPBF4363212-Lead Plastic MSOP–40°C to 85°C LT4363MPMS-2#PBFLT4363MPMS-2#TRPBF4363212-Lead Plastic MSOP–55°C to 125°C LT4363CS-1#PBFLT4363CS-1#TRPBFLT4363S-116-Lead Plastic SO0°C to 70°C LT4363HS-1#PBFLT4363HS-1#TRPBFLT4363S-116-Lead Plastic SO–40°C to 125°C LT4363IS-1#PBFLT4363IS-1#TRPBFLT4363S-116-Lead Plastic SO–40°C to 85°C LT4363MPS-1#PBFLT4363MPS-1#TRPBFLT4363S-116-Lead Plastic SO–55°C to 125°C LT4363CS-2#PBFLT4363CS-2#TRPBFLT4363S-216-Lead Plastic SO0°C to 70°C LT4363HS-2#PBFLT4363HS-2#TRPBFLT4363S-216-Lead Plastic SO–40°C to 125°C LT4363IS-2#PBFLT4363IS-2#TRPBFLT4363S-216-Lead Plastic SO–40°C to 85°C LT4363MPS-2#PBFLT4363MPS-2#TRPBFLT4363S-216-Lead Plastic SO–55°C to 125°C Consult LTC Marketing for parts specified with wider operating temperature ranges. *The temperature grade is identified by a label on the shipping conta

Service Details:

Salrocom technology is a widely appreciated Electronics components ,electronic parts both Active and Passive ,service provider of Electronics products.We are,Importer,Dstributor of SEMICONDUTOR IC , and Programmble IC and electronics and electrical

Additional Information:

• Delivery Time: 2 WEEKS
• Packaging Details: ESD

Service Details:

Features • High current Triac • Low thermal resistance • BTA40 and BTA41 UL1557 recognized components (file ref: 81734) • RoHS (2002/95/EC) compliant packages • UL-94, V0 flammability package resin compliance Applications • On/off function in static relays, heating regulation, induction motor starting circuits • Phase control operations in light dimmers and motor speed controllers Description Available in power packages, the BTA40, BTA41 and BTB41 are suitable for general purpose AC switching. When used with the properly dimensioned heatsink, the BTA40, BTA41 and BTB41 can enable AC switching systems up to 9 kW. Refer to ST Application Note AN533 for thermal management of Triacs. The BTA40, BTA41 and BTB41 provides an insulated tab (rated at 2500 V rms). They are recognized by UL. Representative samples of these components have been evaluated by UL and meet applicable UL requirements for UL 1557 standard (File

Service Details:

Salrocom technology is a widely appreciated Electronics components ,electronic parts both Active and Passive ,service provider of Electronics products.We are,Importer,Dstributor of SEMICONDUTOR IC , and Programmble IC and electronics and electrical

Service Details:

High Speed Optocouplers 10MBd 1Ch 5mAHigh Speed Optocouplers 10MBd 1Ch 5mAHigh Speed Optocouplers 10MBd 1Ch 5mAHigh Speed Optocouplers 10MBd 1Ch 5mAHigh Speed Optocouplers 10MBd 1Ch 5mAHigh Speed Optocouplers 10MBd 1Ch 5mAHigh Speed Optocouplers 10MBd 1Ch 5mA

Service Details:

Transistor Output Optocouplers Phototransistor Out Single CTR 63-200%SFH620A, SFH6206   Vishay Semiconductors Rev. 2.3, 31-Aug-15 1 Document Number: 83675 For technical questions,  THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT  91000 Optocoupler, Phototransistor Output, AC Input DESCRIPTION The SFH620A (DIP) and SFH6206 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 or SMD package. The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation to an operation voltage of 400 VRMS or DC. FEATURES • Good CTR linearity depending on forward current • Isolation test voltage, 5300 VRMS • High collector emitter voltage, VCEO = 70 V • Low saturation voltage • Fast switching times • Low CTR degradation • Temperature stable • Low coupling capacitance • End-stackable, 0.100" (2.54 mm) spacing • High common-mode interference immunity • Material categorization: for definitions of compliance  AGENCY APPROVALS The safety application model number covering all products in this datasheet is SFH620A and SHF6206. This model number should be used when consulting safety agency documents. • UL1577, file no. E52744 system code H, double protection • CSA 93751 • BSI EN 60950, EN 60065 • DIN EN 60747-5-5 (VDE 0884-5), available with

Service Details:

 Low Noise . . . 12 nV/√Hz Typ at f = 1 kHz Low Input Bias Current . . . 1 pA Typ Fully Specified for Both Single-Supply andSplit-Supply Operation Low Power . . . 500 µA Max Common-Mode Input Voltage RangeIncludes Negative Rail Low Input Offset Voltage950 µV Max at TA = 25°C (TLC2262A) Macromodel Included Performance Upgrade for the TS27M2/M4and TLC27M2/M4 Available in Q-Temp AutomotiveHighRel Automotive ApplicationsConfiguration Control/Print SupportQualification to Automotive StandardsdescriptionThe TLC2262 and TLC2264 are dual andquadruple operational amplifiers from TexasInstruments. Both devices exhibit rail-to-railoutput performance for increased dynamic rangein single- or split-supply applications. TheTLC226x family offers a compromise between themicropower TLC225x and the ac performance ofthe TLC227x. It has low supply current forbattery-powered applications, while still havingadequate ac performance for applications thatdemand it. The noise performance has beendramatically improved over previous generationsof CMOS amplifiers. Figure 1 depicts the low levelof noise voltage for this CMOS amplifier, whichhas only 200 µA (typ) of supply current peramplifier.The TLC226x, exhibiting high input impedanceand low noise, are excellent for small-signalconditioning for high-impedance sources, such aspiezoelectric transducers. Because of the micropower dissipation levels, these devices work wellin hand-held monitoring and remote-sensingapplications. In addition, the rail-to-rail output feature with single or split supplies makes this family a greatchoice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC226xAfamily is available and has a maximum input offset voltage of 950 µV. This family is fully characterized at 5 Vand ±5 V.The TLC2262/4 also makes great upgrades to the TLC27M2/L4 or TS27M2/L4 in standard designs. They offerincreased output dynamic range, lower noise voltage and lower input offset voltage. This enhanced feature setallows them to be used in a wider range of applications. For applications that require higher output drive andwider input voltage range, see the TLV2432 and TLV2442. If your design requires single amplifiers, please seethe TLV2211/21/31 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package.Their small size and low power consumption, make them ideal for high density, battery-powered equipment.PRODUCTION DATA information is current as of publication date. Copyright  2001, Texas Instruments IncorporatedProducts conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.Please be aware that an important notice concerning availability, standard warranty, and use in critical applications ofTexas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.Advanced LinCMOS is a trademark of Texas Instruments.40201006030VN – Equivalent Input Noise Voltage – nv//Hz50f – Frequency – HzEQUIVALENT INPUT NOISE VOLTAGEvsFREQUENCY10 102 103 104nV/ HzVnVDD = 5 VRS = 20  TA = 25°CFigure 1On products compliant to MIL-PRF-38535, all parameters are testedunless otherwise noted. On all other products, productionprocessing does not necessarily include testing of all p

Service Details:

Salrocom technology is a widely appreciated Electronics components ,electronic parts both Active and Passive ,service provider of Electronics products.We are,Importer,Dstributor of SEMICONDUTOR IC , and Programmble IC and electronics and electrical. 

Additional Information:

• Delivery Time: 2-3 DAYS
• Packaging Details: ESD

Service Details:

Salrocom technology is a widely appreciated Electronics components ,electronic parts both Active and Passive ,service provider of Electronics products.We are,Importer,Dstributor of SEMICONDUTOR IC , and Programmble IC and electronics and electrical. 

Additional Information:

• Production Capacity: 50000000
• Packaging Details: ESD

Service Details:

System level features - Available in both 5V and 3.3V versions - On-chip SelectRAM™ memory - Fully PCI compliant - Full readback capability for program verification and internal node observability - Dedicated high-speed carry logic - Internal 3-state bus capability - Eight global low-skew clock or signal networks - IEEE 1149.1-compatible Boundary Scan logic - Low cost plastic packages available in all densities - Footprint compatibility in common packages • Fully supported by powerful Xilinx ISE® Classics development system - Fully automatic mapping, placement and routing

Service Details:

Features  Very high speed: 45 ns  Wide voltage range: 2.2 V to 3.6 V and 4.5 V to 5.5 V  Ultra low standby power  Typical Standby current: 2  A  Maximum Standby current: 8  A  Ultra low active power  Typical active current: 1.8 mA at f = 1 MHz  Easy memory expansion with CE and OE features  Automatic power down when deselected  Complementary metal oxide semiconductor (CMOS) for optimum speed and power  in Pb-free 44-pin thin small outline package (TSOP) II package Functional Description The CY62157ESL is a high performance CMOS static RAM organized as 512K words by 16 bits. This device features advanced circuit design to provide ultra low active current. This is ideal for providing More Battery Life™ (MoBL®) in portable applications. The device also has an automatic power down feature that significantly reduces power consumption when addresses are not toggling. Place the device into standby mode when deselected (CE HIGH or both BHE and BLE are HIGH). The input or output pins (I/O0 through I/O15) are placed in a high impedance state when the device is deselected (CE HIGH), the outputs are disabled (OE HIGH), both the Byte High Enable and the Byte Low Enable are disabled (BHE, BLE HIGH), or during an active write operation (CE LOW and WE LOW). To write to the device, take Chip Enable (CE) and Write Enable (WE) inputs LOW. If Byte Low Enable (BLE) is LOW, then data from I/O pins (I/O0 through I/O7) is written into the location specified on the address pins (A0 through A18). If Byte High Enable (BHE) is LOW, then data from I/O pins (I/O8 through I/O15) is written into the location specified on the address pins (A0 through A18). To read from the device, take Chip Enable (CE) and Output Enable (OE) LOW while forcing the Write Enable (WE) HIGH. If Byte Low Enable (BLE) is LOW, then data from the memory location specified by the address pins appear on I/O0 to I/O7. If Byte High Enable (BHE) is LOW, then data from memory appears on I/O8 to I/O15. See the Truth Table on page 11 for a complete description of read and write modes. The CY62157ESL device is suitable for interfacing with processors that have TTL I/P levels. It is not suitable for processors that require CMOS I/P levels. Please see Electrical Characteristics on page 4 for more details and suggested

Service Details:

Salrocom technology is a widely appreciated Electronics components ,electronic parts both Active and Passive ,service provider of Electronics products.We are,Importer,Dstributor of SEMICONDUTOR IC , and Programmble IC and electronics and electrical